Build WIFI antenna itself independently

Build WIFI antenna itself independently is one way to improve the quality of WIFI signal. You can assemble your WLAN card in the form of the antenna and added a grid or parabolic antenna for easy building this antenna. Here's how to build a WIFI antenna:


  1. First you prepare a WLAN adapter is often called usb dongle. While your computer has a WLAN card default pick, still has to be disiapakan / owned by wlan card default can not be removed and placed on the antenna.
  2. For optimal, pilihn Wifi dongle which can accommodate standard 802.11b and 802.11g.
  3. Use a USB extension cable, you can choose the type A, the type maleto famale. It will be an extension of the extension dongle to the USB port on the PC. You will have to put this antenna to the location of the open, such as near a window of the house. Because it used a USB extender long enough, can be up to 5 meters.
  4. Buy or prepare parabolic most easily found. The larger the better, but size is not too large that it is difficult to be placed. Do not get because you want to be a good signal, the antenna actually difficult to put.
  5. Raft with WIFI Dongle and Cable laying in the middle of a parabolic with drilled or adhesive glue. So later WIFI dongle is to be located in the center of the parabolic curve.
  6. Plug this dongle WIFI to a computer with a USB extension there, and set it as a WIFI dongle WIFI card using the network settings on your kmputer.
  7. Navigate your parabolic WIFI antenna toward the remote you want. With the parabolic antenna, WIFI will be more directional. So you need to steer right in the part you want.
  8. Once connected, you can download tune your dish by adjusting the position of the dongle while looking at the signal on the computer. You bisamenggunakan programs like NetStumler to help see the signal strength. In abndingkan with WIFI card standard, WiFi dongle given this pan would be great signal.
So to build this WIFI antenna, all you need is:
  • wifi usb dongle.
  • Extension USB (A to A, Male to famale). Alternatively, you can also use a USB extender cable to UTP, which will be at the other end connect it to USB, using the following scheme:
  • Wok or grid antenna
  • Solatip, nut bolts, and drill depending on needs.
  • Canned or PVC to cover WiFi dongle so no rain, if this antenna would be placed outside the home.
  •  Programs such as NetStumbler

1 comment: